Magnetic Fluid Conditioner
For 1" to 2" Tubing or Pipe.

Cost: $270.00 ea.

The Model 848 Magnetic Fluid Conditioner is designed for the treatment of scale and corrosion in residential, commercial, and light industrial applications or wherever difficult hard water problems exist. The GMX System controls the negative effects of hard water on plumbing systems and appliances.

GMX 848 Magnetic Water Conditioner

The most common uses for the Model 848 are pools, spas, and fountains. Portable pools with 1" pipes can use the Model 800 The Model 800 and Model 848 are the same price.

GMX units are designed to be installed in the outside environment and can even be barried underground. GMX units are rugged and built to last a lifetime.

Whole House System
for 1" PVC or 1 1/4" Copper
2 - Model 848s and
1 - Model 800 units are required:

2 Model 848s - on the main water line.
1 Model 800 - on hot line coming out of the water heater.
Whole House Cost: $780.00
Internet Sales Only!

If the water in the heater is turned over at least once every day, then only one Model 800 unit is needed; otherwise, two units are needed for results.

Main Water Line Placement

Two units should be placed on the incoming water line in a location that treats all the water in the house including outside sprinklers and garden hose valves. Magnetically treated water will also benefit plants.

For the best results, GMX units should be placed about two feet from the water meter or well water pressure tank and at least two feet after any pump, filter, or other turbulence causing device. The units should be placed in the center of a three foot section of straight pipe. The smoother the water flow, the better the conditioning results - although situations may require different placement.

DO NOT straddle a shutoff valve. The units should also be placed
on a nonferrous (plastic, copper, rubber,
PVC, or stainless steel) pipe or tubing.

Water Heater(s) Placement

At least one Model 800 unit is needed to treat the hot water leaving a 40 gallon or smaller the water heater. If there is more than one water heater, or it's 50 gallons or more then one unit is needed for each water heater.

Whole House System
2 - Model 800s and
2 - Model 848s units are required:

2 Model 848s - on the main water line.
2 Model 800s - on hot line coming out of the water heater.
Whole House Cost: $1,040.00
Internet Sales Only!

Although the water flow is smoother through a rigid water pipe, the unit can be over a flexible water line if a rigid water line is not used or accessible.

Bonus Offer

Ice Maker or Humidifier Booster: $170.00
Internet Sales Only!

Ice Maker and/or Humidifier Booster requires
one Model 400 with the purchase of any
GMX whole house magnetic water conditioning system!!

Installing The Magnetics
( 1 and 2 Units )

GMX Model 848, 2 Units

Place the Model 848 against the pipe or tube to be treated.

Place the backing plate on the opposite side of the pipe and align the holes with the unit.

Insert the nylon bolts through the holes in the unit and backing plate and secure with the wing-nuts.

Tighten the unit until it is snug against the pipe. Do not over tighten !

If a second unit is going to be used, it should be mounted tandem to the first and they should be spaced 1" apart. The units should also oppose and not attract each other. Labels should be facing the same direction.

Installing The Magnetics
( 4 Units )

For 2" to 3" pipe, use 4 units in 2 segments
GMX Model 848, 4 Units

For installation on 2" pipe, four Model 848 units are configured in two segments of two units. The Backing Plates are NOT used.

Place two Model 848's against the pipe or tube. The two units in each segment MUST be mounted so they OPPOSE each other. The label on the Top unit will read in the opposite direction to that of the Bottom unit.

Insert the long nylon bolts through the holes in both units and secure with the wing-nuts.

Tighten the units until they are snug against the pipe. Do not over tighten !

The second segment should be mounted tandem to the first segment and spaced 1" apart. The labels on the Top units of each segment should be in the same direction.

Specifications

Magnets: Strontium Ferrite Permanent Ceramic.

Coating: Poly Vinyl

Size: 5-1/4" x 4-3/4" x 1-3/4" (L x W x H)

Mounting Bracket: Medium gauge steel developed through computer research.

Weight: 2 pounds each.

GMX Model 848 Installation Instructions

Magnetic Fluid Conditioner For 1" to 2" Tubing or Pipe.

Installing The Magnetics ( 1 and 2 Units )

Installing The Magnetics ( 4 Units )

Specifications

GMX Model 848
Installation Instructions

Magnetic Fluid Conditioner
For 1" to 2" Tubing or Pipe.

Installing The Magnetics
( 1 and 2 Units )

Installing The Magnetics
( 4 Units )