|
For over 50 years, Real-Fyre Gas Logs have provided a natural wood-like fire with maximum ease, efficiency and economy.
|
Peterson Cermaic Gas Logs |
Made in the USA |
Superior Materials
Real-Fyre gas logs are made of superior refractory ceramics, expanded
shales and aggregates and use an advanced calcium aluminate binder.
This combination of materials, pre-fired in a rotary kiln, provides:
|
Greater Compressive Strength |
Allowing finer detailing in the log making process without breaking or chipping, and producing a longer lasting log. |
Higher Bulk Density |
Providing more radiant heat, both while in operation, and after the set has been turned off, especially when compared to gas logs made with vacuum formed fibers. |
Better Rheology (flow rate) |
Meaning a better texture to the logs, fewer “bugholes”, better strength, and less water in the mix, for better consistency of product.
|
Higher Refractoriness |
The refractory material has a Pyrometric Cone Equivalent of 2650 degrees (F), higher than any other log and higher PCE means better ability to withstand heat over time. The logs won’t break down. |
Lower Iron Content |
Other materials have 50-900% more iron! Iron turns to iron oxide and changes the color of logs.
|
Steel Reinforcing Rods |
To further add to the integrity of Real-Fyre Gas Logs, precisely sized and designed steel rods are inserted into each log. This provides maximum reinforcement and prevents breakage.
|
|